Bộ hiển thị cân Dacell DN520N-RS485/RS422

Hãng sản xuất: Dacell ( Hàn Quốc)
Chứng từ: CO, CQ
Nguồn cấp : 85V -265V
Đầu ra truyền thông: chuẩn RS485, RS422

0 đ
Số lượng
  • Mô tả sản phẩm
  • Thông số kỹ thuật
  • Hướng dẫn sử dụng
  • Chính sách bảo hành
  • Tài liệu
    • Đầu ra truyền thông: chuẩn RS485, RS422
    • Kích thước: 100(H) x 193(W) x 130mm (D)
    • Hiển thị LED 7 thanh : 20mm(H) x 13mm( W)
    • Độ phân giải 19Bits - tốc độ 200 times/
    • Đầu vào số DI : Zero, Tare, Reset,Print, Reset, Net, Gross
    • Tích hợp truyền thông RS232
    • Nguồn Loadcell : 10 VDC
    • Nguồn cấp : 85V -265V
    • Ứng dụng : Điều khiển cho các loại cân đóng gói, cân chiết rót, cân kiểm tra, cân kiểm phễu, cân giới hạn…

     

  • TÀI LIỆU KỸ THUẬT BỘ HIỂN THỊ CÂN DN520N SERIES

    SPECIFICATIONS

    Specifications Accuracy
    Load cell excitation 10VDC±5%, 320mA
    Input Signal 0.5 ~ 3.0mV/V
    A/D converting speed 200times/sec
    A/D converter resolution 1/520,000 counts(19bits), Δ∑
    Non-linearity 0.01% of full scale
    Zero adjustment range -0.6mV~42mV
    Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
    Annunciator steady, zero, tare, gross, auto, print, hold,Interface
    Decimal point position 0, 0.0, 0.00, 0.000
    Keyboard Number key and function key 12 PCS.
    Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
    Non-linearity 0.01% of full scale
    Rear panel Loadcell input : 5pin connector
    External control : 12pin input terminal
    (zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C)
    control relay output : 7pin terminal
    Power SMPS Free Voltage (85V~265V)

     

    Option

    • Analog Out-put (V-out) : 0~10V
    • Analog Out-put (I-out) : 4~20mA
    • Serial I / F : RS-422, RS-485
    • BCD In-put
    • BCD In-out
    • RS3232C and Current loop : Standard Installed

     

     

  • Bảo hành 12 tháng theo quy định của nhà sản xuất

  • Dữ liệu đang được cập nhật!

Sản phẩm cùng chuyên mục

Sản phẩm đã xem

Biến tần SCHNIEDER  18KW 3P 380V  ATV610D18N4

Biến tần SCHNIEDER 18KW 3P 380V ATV610D18N4

Mã sản phẩm: ATV610D18N4
0 đ
Bộ hiển thị cân Dacell DN520N-RS485/RS422

Bộ hiển thị cân Dacell DN520N-RS485/RS422

Mã sản phẩm: DN520N-RS485/RS422
0 đ